Chrysler 5.2L-5.9L Index of Articles
This simplified ignition system wiring diagram applies to the following vehicles: 5.2L V8 Dodge Ram 1500 Pickup: 1994, 1995. 5.2L V8 Dodge Ram 2500 Pickup: 1994,... [read more]
The PCM has 3 connectors and are color coded (black, white, and gray). Each connector has 3 rows of slots for a total of 32 slots (terminals). IMPORTANT: The pin out chart... [read more]
Testing the engine compression, on your 5.2L or 5.9L V8 equipped Dodge Ram pickup or van, is not as hard as people think. In this tutorial, I'll show you how to do it and... [read more]
The manifold absolute pressure (MAP) sensor can be very accurately tested with a multimeter to see if it's bad or not without removing it (no scan tool required). In this... [read more]
In this tutorial, I'm gonna' show you the 3 most common tests that are done to check for a blown head gasket. Two of the three are extremely easy and don't involve using... [read more]
The throttle position sensor (TPS) can be very accurately tested with a multimeter to see if it's bad or not without removing it. In this tutorial, I'll show you just how... [read more]
The throttle position sensor (TPS) can be easily tested using only a multimeter and in this article, I'll show you how. This article covers troubleshooting diagnostic... [read more]
The fuel injection computer (known in tech speak as the PCM = Powertrain Control Module) is located on the firewall (passenger side) of your Dodge Ram pickup. The PCM has a... [read more]