EEC-V 104-Pin PCM Connector Pin Out Chart (1995 3.8L V6 Ford Windstar)

EEC-V 104-Pin PCM Connector Pin Out Chart (1995 3.8L V6 Ford Windstar)

Here you'll find the 104-pin connector pin-out of the EEC-V fuel injection computer for the 1995 3.8L Ford Windstar.

If you take a look at the backside (wire side) of the EEC-V PCM's 104-pin connector, you're going to see that there are some numbers embossed on the connector itself, and these numbers will help you correctly identify the pins you need to test.

APPLIES TO: The PCM connector pinout applies only to the following vehicles:

  • 3.8L V6 Ford Windstar: 1995.

WIRE COLOR LEGEND/ID:

PCM CONNECTOR TESTING TIPS:

104 Pin PCM Connector Pinout
Pin Wire Color Description
1 PPL/ORG Shift Solenoid #2 (SS2)
2 PNK/LT GRN Malfunction Indicator Lamp (MIL) Control
3 NOT USED
4 NOT USED
5 NOT USED
6 NOT USED
7 NOT USED
8 NOT USED
9 NOT USED
10 NOT USED
11 NOT USED
12 NOT USED
13 PNK/LT BLU Data Link Connector (DLC) –PWR Supply
14 NOT USED
15 PNK/LT BLU Data Link Connector (DLC) Bus (–)
16 TAN/ORG Data Link Connector (DLC) Bus (+)
17 LT GRN/ORG High Speed Fan Control
18 NOT USED
19 NOT USED
20 NOT USED
21 NOT USED
22 NOT USED
23 ORG/RED Ignition Ground (IGN GND)
24 BLK/WHT Power Ground (PWR GND)
25 BLK Case Ground (CASE GND)
26 NOT USED
27 ORG/YEL Shift Solenoid #1 (SS1)
28 NOT USED
29 TAN/WHT Transmission Control Switch (TCS) Input
30 DK GRN Octane Adjust Shorting Bar Input (OCT ADJ)
31 NOT USED
32 NOT USED
33 ORG/YEL Vehicle Speed Sensor (VSS) Input (–)
34 NOT USED
35 RED/BLK Heated Oxygen Sensor #12 (HO2S 12) Input (Catalyst Monitor) –Sensor #4
36 TAN/LT BLU Mass Air Flow Sensor Return (MAF RTN)
37 ORG/BLK Transmission Fluid Temperature (TFT) Sensor Input
38 LT GRN/RED Engine Coolant Temperature (ECT) Sensor Input
39 GRY Intake Air Temperature (IAT) Sensor Input
40 DK GRN/YEL Fuel Pump Monitor Input
41 BLK/YEL A/C High Pressure Cutoff Switch (ACCS) Input
42 NOT USED
43 ORG/LT GRN Fuel Flow Output (Digital Cluster Only)
44 NOT USED
45 NOT USED
46 NOT USED
47 BRN/PNK EGR Vacuum Regulator (EVR) Control
48 WHT/PNK Ignition Diagnostic Monitor (IDM) Input
49 GRY/ORG Profile Ignition Pickup (PIP) Input
50 PNK Spark Output (SPOUT) Output
51 BLK/WHT Power Ground (PWR GND)
52 NOT USED
EEC-V 104-Pin PCM Connector Pin Out Chart (1995 3.8L V6 Ford Windstar)
53 PNK/BLK Shift Solenoid #3 (SS 3)
54 NOT USED
55 YEL Keep Alive Power (KAPWR) B+
56 LT GRN/BLK (EVAP) Canister Purge Solenoid (EVAP CAN PURGE)
57 NOT USED
58 DK GRN/WHT Vehicle Speed Sensor (VSS) + Input
59 NOT USED
60 GRY/LT BLU Heated Oxygen Sensor #11 (HO2S 11) Input
61 PPL/LT GRN Heated Oxygen Sensor #22 (HO2S 22) (Catalyst Monitor)
62 NOT USED
63 NOT USED
64 LT BLU/YEL Transmission Range (TR) Sensor
65 BRN/LT GRN Differential Pressure Feedback EGR (DPFE) Sensor Input
66 NOT USED
67 NOT USED
68 NOT USED
69 PNK/YEL Wide Open Throttle A/C Cutoff (WAC) Relay Output
70 NOT USED
71 RED Power (VPWR)
72 NOT USED
73 TAN/BLK Fuel Injector #5 Control
74 BRN/YEL Fuel Injector #3 Control
75 TAN Fuel Injector #1 Control
76 BLK/WHT Power Ground (PWR GND)
77 BLK/WHT Power Ground (PWR GND)
78 NOT USED
79 NOT USED
80 LT BLU/ORG Fuel Pump Relay Control
81 WHT/YEL Electronic Pressure Control (EPC) Solenoid
82 RED/LT BLU Torque Converter Clutch (TCC) Solenoid Control
83 WHT/LT BLU Idle Air Control (IAC) Valve Control
84 GRY/BLK Turbine Shaft Speed (TSS) Sensor Input
85 DK BLU/ORG Camshaft Position (CMP) Sensor Input
86 TAN/LT GRN A/C High Pressure Cutout Switch
87 RED/BLK Heated Oxygen Sensor #21 (HO2S 21) Input
88 LT BLU/RED Mass Air Flow (MAF) Sensor Input
89 GRY/WHT Throttle Position (TP) Sensor Input
90 BRN/WHT Reference Voltage (REF VOLT)
91 GRY/RED Signal Return (SIG RTN)
92 RED/LT GRN Brake On/Off (BOO) Switch Input
93 RED/WHT Heated Oxygen Sensor #11 (HO2S 11) Heater
94 YEL/LT BLU Heated Oxygen Sensor #21 (HO2S 21) Heater
95 WHT/BLK Heated Oxygen Sensor #12 (HO2S 12) Heater (Catalyst Monitor)
96 TAN/YEL Heated Oxygen Sensor #22 (HO2S 22) Heater (Catalyst Monitor)
97 RED Power (VPWR)
98 DK BLU Low Fan Control
99 LT GRN/ORG Fuel Injector #6 Control
100 BRN/LT BLU Fuel Injector #4 Control
101 WHT Fuel Injector #2 Control
102 NOT USED
103 BLK/WHT Power Ground (PWR GND)
104 NOT USED

WIRE COLOR LEGEND: You can find the wire color legend here: Connector Wire Color Legend (1995-2003 3.8L V6 Ford Windstar).

PCM 104-Pin Connector Pin Out Chart (1995 3.8L V6 Ford Windstar)

Relate PCM Connector Pinouts

Disclaimer

I've made every effort to double and triple check the above info (and in the next couple of pages) and I've used the best sources to compile it but nothing in life is perfect. I don't have a staff of proof readers or editors, I'm just a little guy typing this stuff up in my spare time to help and give back to the Do-It-Yourself community. So without further ado, here's my disclaimer:

© copyright Abraham Torres-Arredondo: This information is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Thank You For Your Donation

If this info saved the day, buy me a beer!

If This Info Saved the Day, Buy Me a Beer!