PCM Connector Pin Out Chart (1993 3.0L V6 Nissan Quest)

PCM Connector Pin Out Chart (1993 3.0L V6 Nissan Quest)

Below, you'll find the powertrain control module (PCM) connector pin-out for the 1993 Nissan Quest.

APPLIES TO: The PCM connector pinout applies only to the following vehicles:

  • 3.0L V6 Nissan Quest: 1993.
  • 3.0L V6 Mercury Villager: 1993.

WIRE COLOR LEGEND/ID:

Nissan Quest PCM Connector Pinout
Pin Wire Color Description
 1 BLU Ignition Signal —IGNS
 2 GRN/WHT Tachometer —RPM
 3 RED Ignition Check —IGNC
 4 WHT/GRN ECM Power Relay Control —PCMR
 5 NOT USED
 6 BLK Ground –GND
 7 YEL/RED Data Link Connector –DLC
 8 WHT/PNK EGR Temperature Sensor (Only for California Model) –EGRT
 9 BLU/ORG Radiator Fan (Low Speed) —LFAN
10 BRN/WHT Radiator Fan (High Speed) –HFAN1/HFAN2
11 GRY/RED Air Conditioning Relay –ACR
12 PNK Power Steering Pressure Switch –PSP
13 BLK Ground –GND
14 YEL/BLU Diagnostic Link Connector –DLC
15 YEL/BLK Diagnostic Link Connector –DLC
16 WHT/BLU Mass Air Flow Sensor –MAF+
17 ORG/BLU Mass Air Flow Sensor –MAF-
18 LT GRN/RED Engine Coolant Temperature Sensor –ECT
19 LT GRN/BLK Heated Oxygen Sensor –HO2S
20 RED Throttle Position Sensor –TP
21 WHT/BLK Signal Ground –SIGRTN
22 RED/WHT Crankshaft Position Sensor (Reference Signal) –CKPREF
23 BLU/WHT DTC
24 GRY/RED Malfunction Indicator Light –MIL
25 NOT USED
26 NOT USED
27 WHT Knock Sensor –KS
28 RED/GRN Throttle Opening Signal –TCM (TP)
29 WHT/BLK Signal Ground –SIGRTN
30 RED/WHT Crankshaft Position Sensor (Reference Signal) –CKPREF
31 RED/BLU Crankshaft Position Sensor (Position Signal) –CKP
32 GRN/YEL Vehicle Speed Sensor –VSS
33 BRN/YEL Closed Throttle Position Switch (Idle Position) –IDL-
34 BLU/BLK Start Signal -VST
35 GRN/BLK TCM (A/T Control Module) (Park/Neutral Position Signal) –PNPS
36 BLU/YEL Ignition Switch –IGN
37 BRN Power Supply for Sensors -VREF
38 RED/BLK Power Supply Input –VPWR
39 BLK/RED Ground –GND
40 RED/BLU Crankshaft Position Sensor (Position Signal) –CKP
41 WHT/RED Air Conditioning Signal (High Pressure Switch) –HPS
42 NOT USED
43 NOT USED
44 RED/YEL Power Source for Closed Throttle Position Switch –IDL+
45 NOT USED
46 YEL Power Supply Input (Back-up) –KAPWR
47 RED/BLK Power Supply Input –VPWR
48 BLK/RED Ground –GND
PCM Connector Pin Out Chart (1993 3.0L V6 Nissan Quest)
Nissan Quest PCM Connector Pinout
Pin Wire Color Description
101 GRN/ORG Injector No. 1 –INJ1
102 GRY EGR Control Solenoid Valve Control –EGRC
103 GRN/RED Injector No. 3 –INJ3
104 BLU/RED Fuel Pump Relay
105 YEL/GRN Injector No. 5 –INJ5
106 NOT USED
107 BLK Ground –GND
108 BLK Ground –GND
109 RED/BLK Power Supply Input –VPWR
110 GRN Injector No. 2 –INJ2
111 NOT USED
112 YEL/PPL Injector No. 4 –INJ4
113 LT BLU Idle Air Control Valve –IAC
114 GRY/BLU Injector No. 6 –INJ6
115 NOT USED
116 BLK Ground –GND

WIRE COLOR LEGEND: You can find the wire color legend here: Connector Wire Color Legend (1993-1998 3.0L V6 Nissan Quest).

Relate PCM Connector Pinouts

Disclaimer

I've made every effort to double and triple check the above info (and in the next couple of pages) and I've used the best sources to compile it but nothing in life is perfect. I don't have a staff of proof readers or editors, I'm just a little guy typing this stuff up in my spare time to help and give back to the Do-It-Yourself community. So without further ado, here's my disclaimer:

© copyright Abraham Torres-Arredondo: This information is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Thank You For Your Donation

If this info saved the day, buy me a beer!

If This Info Saved the Day, Buy Me a Beer!