PCM Pin Out Chart (1996 5.2L, 5.9L Dodge Ram Pickup)

  • By: Abraham Torres-Arredondo
  • Created: 12 April 2014
  • Updated: 19 December 2022
  • Articl Id: 587
Page 2 of 3

1996 PCM WHITE Connector

White Connector PCM Pin Out Chart 1996 5.2L, 5.9L V8 Dodge Ram Pickup

IMPORTANT: The following pin out chart applies only to the 1996 Dodge Ram pickups with a 5.2L or 5.9L V8 engine.

WHITE PCM 32 Pin Connector
Pin Wire Color Description
 B-1 PPL Trans Temp In
 B-2 PPL/TAN Fuel Injector #7
 B-3 --- Not Used
 B-4 WHT/DK BLU Fuel Injector #1
 B-5 YEL/WHT Fuel Injector #3
 B-6 GRY Fuel Injector #5
 B-7 --- Not Used
 B-8 PPL/WHT Variable Force Solenoid
 B-9 --- Not Used
B-10 DK GRN Gen Field Driver
B-11 ORG/BLK Torque Converter Clutch Solenoid
B-12 BRN/DK BLU Fuel Injector #6
B-13 GRY/LT BLU Fuel Injector #8
B-14 --- Not Used
B-15 TAN Fuel Injector #2
B-16 LT BLU/BRN Fuel Injector #4
B-17 --- Not Used
B-18 --- Not Used
B-19 --- Not Used
B-20 --- Not Used
B-21 BRN Over-Drive (OD) Solenoid
B-22 --- Empty
B-23 --- Empty
B-24 --- Not Used
B-25 DK BLU/BLK Trans Output Shaft Speed Sensor
B-26 --- Not Used
B-27 WHT/ORG Vehicle Speed Sensor (VSS) Input
B-28 LT GRN/BLK Trans Output Shaft Speed Sensor
B-29 LT GRN/WHT Governor Pressure Signal
B-30 PNK Trans Relay
B-31 ORG 5 Volt Supply
B-32 GRY/YEL EGR Solenoid Control
PCM Pin Out Chart 1996 5.2L, 5.9L V8 Dodge Ram Pickup

Safety Precautions

Here are some very important safety precautions when testing the wires coming out of the PCM connectors.

  1. If one or any of the wires on your Dodge Ram DO NOT match the color stated in the pin out charts, then you should not use the pin out charts in this article. Why? Because this is the clearest indication that these ARE NOT the connector pin out charts for your particular vehicle.
  2. Never probe the front of the connector.
    1. You should use a wire piercing probe and probe the wire a few inches away from the connector.
    2. You should use a Back Probe.
  3. Read the Disclaimer.