PCM Connector Pin Out Chart (2002 4.6L Crown Victoria, Grand Marquis)

2002 4.6L Ford Crown Victoria And Mercury Grand Marquis PCM 104 Pin Connector

The EEC-V powertrain control module (PCM) has a 104 pin connector. To aid you in correctly identifying the connector pins, the back side of the connector (wire side) is embossed with a few numbers.

APPLIES TO: The PCM connector pinout applies on to the following vehicles:

  • Ford Crown Victoria 4.6L: 2002.
  • Mercury Grand Marquis 4.6L: 2002.

WIRE COLOR LEGEND: You can find the wire color legend here: PCM Connector Pinout Wire Color Legend.

PCM 104 Pin Connector
PinWire ColorDescription
 1ORG/YELIgnition Coil 6
 2PNK/LT GRNCheck Engine Light (CEL)
 3BLK/WHTPower Ground
 4---
 5---
 6ORG/YELShift Solenoid A
 7---
 8---
 9YEL/WHTFuel Gauge
10---
11VIO/ORGShift Solenoid B
12WHT/LT GRNTransmission Control Indicator Light
13VIOData Link Connector (EPROM)
14---
15PNK/LT BLUData Link (-)
16TAN/ORGData Link (+)
17---
18---
19---
20WHT/LT GRNFuel Door Indicator
21BLK/PNKCrankshaft Position (CKP) Sensor (+)
22GRY/YELCrankshaft Position (CKP) Sensor (-)
23---
24---
25BLKCase Ground
26LT GRN/WHTIgnition Coil 1
27LT GRN/YELIgnition Coil 5
28RED/ORGFan Low Relay
29TAN/WHTTrans Control Switch
30---
31---
32---
33PNK/ORGVehicle Speed Sensor (VSS) (-)
34YEL/BLKDigital Transmission Range (DTR) Sensor - TR 1
35RED/LT GRNBank 1 Sensor 2 O2 Signal
36TAN/LT BLUMAF Sensor Signal Return (Ground)
37ORG/BLKTrans Fluid Temp (TFT)
38---
39GRYIntake Air Temp (IAT) Sensor
40DK GRN/YELFuel Pump Monitor (FPM)
41BLK/YELA/C Cutout Switch
42RED/WHTEngine Coolant Temp Indicator
43DK BLU/LT GRNFuel Flow Rate
44---
45ORG/REDEngine Temp Indicator
46LT GRN/VIOFan High Relay
47BRN/PNKEGR Vacuum Regulator Solenoid Control
48---
49LT BLU/BLKDigital Transmission Range (DTR) Sensor - TR 2
50WHT/BLKDigital Transmission Range (DTR) Sensor - TR 4
51BLK/WHTPower Ground
52WHT/PNKIgnition Coil 3

WIRE COLOR LEGEND: You can find the wire color legend here: PCM Connector Pinout Wire Color Legend.

NOTE: You can find all of the available PCM connector pinouts for the 4.6L Crown Vic/Grand Marquis in this index:

2002 4.6L Ford Crown Victoria And Mercury Grand Marquis PCM 104 Pin Connector

Safety Precautions

Here are some very important safety precautions when testing the wires coming out of the 104 pin PCM connector.

  1. If one or any of the wires on your Ford van DO NOT match the color stated in the pin out charts, then you should not use the pin out charts in this article. Why? Because this is the clearest indication that these ARE NOT the connector pin out charts for your particular Ford Crown Vic/Grand Marquis.
  2. Never probe the front of the connector.
    • You should use a wire piercing probe and probe the wire a few inches away from the connector.
    • You should use a back-probe.
  3. You should never disconnect any of the PCM connectors without first disconnecting the battery negative (-) terminal.

Disclaimer

I've made every effort to double and triple check the above info (and in the next couple of pages) and I've used the best sources to compile it but nothing in life is perfect. I don't have a staff of proof readers or editors, I'm just a little guy typing this stuff up in my spare time to help and give back to the Do-It-Yourself community. So without further ado, here's my disclaimer:

© copyright Abraham Torres-Arredondo: This information is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

If you do spot errors, please let me know. You can use the contact form at the end of the article.