Toyota 2.2L Index of Articles
Ignition System Wiring Diagram 1992-1995 2.2L Toyota Camry
- December 06, 2016
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

This simplified wiring diagram of the ignition system applies only to 1992, 1993, 1994 and 1995 2.2L Toyota Camry. Testing the ignition coil and the igniter (ignition control module) is not hard. I've written two tutorials that'll help you... read more >>
How To Test The Igniter (1992-1995 2.2L Toyota Camry)
- December 06, 2016
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

When the igniter (ignition control module) on your 1992, 1993, 1994, or 1995 2.2L Toyota Camry fails, the engine is not gonna' start due a lack of spark. In this tutorial, I'm gonna' explain how to test the igniter (ignition control module) and... read more >>
How To Test The Rear O2 Heater -P0141 (1997-2000 2.2L Camry)
- April 18, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

Sooner or later, the rear oxygen sensor's internal heater is gonna' fail. When it does, your Camry's PCM is gonna' light up the check engine light with a P0141 trouble code. If this is what's happening in your case, this tutorial will help you... read more >>
How To Test The Ignition Coil (1992-1995 2.2L Toyota Camry)
- December 06, 2016
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

When the ignition coil fails inside the distributor, your 1992-1995 2.2L Toyota Camry is not gonna' start. The cool thing is that, even though the 2.2L Toyota Camry's ignition coil is inside the distributor, testing it is not hard and can by... read more >>
How To Test The Throttle Position Sensor (1992-1999 2.2L Celica)
- April 05, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

The throttle position sensor, on your 2.2L Toyota Celica, creates a very simple analog voltage signal that you and I can easily test with a multimeter in Volts DC mode. In this tutorial, I'll show you how in a step-by-step way and without using... read more >>
How To Retrieve OBD I Trouble Codes (1992-1995 2.2L Camry)
- June 01, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

Toyota made it easy to retrieve trouble codes on the 1992, 1993, 1994, and 1995 2.2L Toyota Camry. So, if you've been needing to find out the trouble code behind your Camry's check engine light, this is the tutorial you've been looking... read more >>
TPS Idle Switch Multimeter Test (1992-1996 2.2L Camry)
- April 02, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

As you're already aware, the throttle position sensor on your 1992-1996 2.2L Toyota Camry has 4 wires coming out of its connector. This is because the TPS is 2 sensors in 1 assembly. In other words, the TPS assembly is made up of an idle switch and... read more >>
How To Test The Fuel Pump (1996-2001 2.2L Camry)
- May 24, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

The fuel pump on the 1996-2001 2.2L Toyota Camry can be accurately diagnosed with a fuel pressure gauge. In this tutorial I'll show you where to connect it and how to find out if the fuel pump is bad or not. I'm also gonna' explain a simple and... read more >>
How To Test The Throttle Position Sensor (1992-1996 2.2L Camry)
- March 28, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

The throttle position sensor, on the 2.2L Toyota Camry, is two sensors in one assembly. One part of the TPS assembly is an idle switch and the other is the actual throttle position sensor. In this tutorial, I'll show you how to test the TPS part... read more >>
How To Test The Fuel Pump (1992-1995 2.2L Toyota Camry)
- May 11, 2015
- Updated: September 14, 2020
- Written by: Abraham Torres-Arredondo

Connecting a fuel pressure test gauge, to your 2.2L Toyota Camry, is not hard. Not too mention that testing your 2.2L Camry's fuel pump with a fuel pressure test gauge is the most accurate way of finding out if it has failed or is failing. In... read more >>